VOOPOO DRAG X Plus TPP Replacement Pod
If your VOOPOO DRAG X Plus is losing flavour, leaking from the base, or simply needs a fresh tank, the VOOPOO DRAG X Plus TPP Replacement Pod is the official part built to restore it. This is the genuine TPP (Tank Pod Push) atomiser tank that shipped with the original DRAG X Plus kit, designed to work with VOOPOO's TPP mesh coil range for consistent flavour and steady vapour production. It is a straightforward, no-nonsense pod swap for anyone who wants their device performing like new without buying an entirely new kit.
Unlike prefilled pods that arrive pre-loaded with e-liquid, this is a refillable tank. You top it up with your own choice of e-liquid, drop in a TPP coil, and you are ready to vape. It is the most cost-effective way to keep a DRAG X Plus (or any TPP-compatible VOOPOO device) running, since replacing a worn or cracked pod is far cheaper than replacing the whole mod. Available at Vape Wave.
VOOPOO DRAG X Plus TPP Replacement Pod Design
The pod is built from food-grade PCTG, a durable, crack-resistant plastic that VOOPOO favours for its TPP range because it holds up to daily handling and doesn't cloud or discolour over time. A magnetic connection secures the pod firmly to the base of the DRAG X Plus, so there's no wobble or accidental disconnection during use. The tank also uses a bi-directional convection airway, which draws air in from two channels rather than one, helping the coil wick more evenly and reducing the chance of dry hits.
Pod System
This pod is designed exclusively around VOOPOO's TPP platform. It uses a bottom-fill design with a silicone stopper, meaning you unscrew the base, refill from underneath, and reseal without disturbing the coil or drip tip. The pod holds up to 2ml of e-liquid, the maximum capacity permitted under UK TPD regulations for refillable tanks. Note that international listings for this pod often quote a 5.5ml capacity; that figure applies to non-UK markets only, and the version stocked at Vape Wave is fully TPD-compliant for UK sale.
Coil Technology
The TPP Replacement Pod uses a press-fit coil installation, so there's no threading or twisting involved when swapping coils. It's compatible with the full VOOPOO TPP coil series, including the TPP DM1 (0.15ohm) and TPP DM2 (0.20ohm) mesh coils, both of which use mesh heating elements to distribute heat more evenly across the coil surface than traditional round-wire builds. This translates into a smoother draw and richer flavour, particularly noticeable if your current pod has been in use for a few weeks and the coil has started to taste burnt or muted.
Performance
Paired with a fresh TPP coil, this pod delivers the dense, flavourful vapour that DRAG X Plus owners expect from a direct-to-lung setup. The improved bi-directional airflow reduces gurgling and leaking compared to older single-channel designs, and the magnetic base connection keeps the seal tight even under higher wattage use. Most of the performance drop-off vapers notice with a DRAG X Plus comes down to a tired coil or a cracked pod rather than the mod itself, so replacing the pod is often the simplest fix.
Who It's For
This replacement pod is for existing DRAG X Plus owners (and owners of other TPP-compatible VOOPOO devices) who need to replace a leaking, cracked, or flavour-flat original pod. It's also a sensible option for anyone who bought a used DRAG X Plus and wants a fresh tank before their first vape, or for vapers who like to keep a spare pod on hand so they're never without a working device.
What's Included
- 1 x VOOPOO DRAG X Plus TPP Replacement Pod (empty, coil sold separately)
VOOPOO DRAG X Plus TPP Replacement pod specifications
| Feature | Detail |
|---|---|
| Compatible devices | VOOPOO DRAG X Plus, DRAG X, DRAG X Pro, DRAG S, DRAG S Pro, DRAG Max, DRAG 3, Argus Pro, Argus GT |
| E-liquid capacity | 2ml (UK TPD-compliant) |
| Material | Food-grade PCTG |
| Fill method | Bottom-fill with silicone stopper |
| Coil compatibility | VOOPOO TPP coil series (TPP DM1, TPP DM2) |
| Coil installation | Press-fit |
| Connection | Magnetic base |
| Airflow design | Bi-directional convection airway |
| Pod included | Yes (coil sold separately) |
Safety Information
This is a vaping accessory intended for adults aged 18 and over. Always check the pod is seated correctly and the base is sealed before filling to avoid leaks. Use only e-liquids appropriate for direct-to-lung devices, and keep all vaping products and e-liquids out of reach of children and pets. If you notice cracks, discolouration, or persistent leaking from the pod body, stop using it and replace it.
Things To Consider Before Buying
Confirm your device uses the TPP coil system before ordering, since VOOPOO also produces PnP pods that look similar but use a different coil range and are not interchangeable with this one. If you're switching between TPP and PnP pods on the same base, you'll need a compatible adaptor, which is usually included with the original DRAG X Plus kit. It's also worth having a spare TPP coil ready, since a new pod paired with an old, gunked-up coil won't restore full flavour on its own.
Maintenance Tips
Rinse the pod with warm water (not the coil) if it starts to taste off, and let it dry fully before refilling. Wipe the magnetic base and connection points occasionally to stop residue building up, which can affect the seal. Replace the coil every one to two weeks with regular use, or sooner if you notice a burnt taste or reduced vapour.
Storage Tips
Store the pod upright when not in use to prevent e-liquid pooling near the airflow channels, and keep it away from direct sunlight or high heat, which can degrade the PCTG material over time. If storing for an extended period, empty any remaining e-liquid first to avoid residue hardening inside the tank.
Returns and Refunds Policy
As with all pods and atomiser products, this item can only be returned if unopened and unused, in line with our Return & Refund Policy. For hygiene and safety reasons, opened or used pods cannot be accepted back once the seal has been broken.
Conclusion
The VOOPOO DRAG X Plus TPP Replacement Pod is the genuine fix for a DRAG X Plus that's lost its spark, whether that's from a cracked tank, a persistent leak, or coils that have simply run their course. It's a small, inexpensive part that makes a noticeable difference to flavour and vapour production, and keeping a spare in your drawer means you're never caught out mid-week with a device that won't perform.
Related Products
- VooPoo PnP Drag X Replacement Pods
- VooPoo Vinci E Replacement Pod
- VOOPOO VMATE V2 Replacement Pods
- Voopoo Argus Pod Cartridge 0.4 Ohm 2ml
- Voopoo Argus Replacement Pods Cartridge
Frequently Asked Questions
Is the VOOPOO DRAG X Plus TPP Replacement Pod prefilled with e-liquid?
No, this is an empty replacement pod. You fill it yourself with your own choice of e-liquid, up to its 2ml UK-compliant capacity. It does not come with any e-liquid included.
Which devices work with this TPP Replacement Pod?
It's built for the VOOPOO DRAG X Plus and is also compatible with other TPP coil system devices, including the DRAG X, DRAG X Pro, DRAG S, DRAG S Pro, DRAG Max, DRAG 3, Argus Pro and Argus GT.
How many ml does the pod hold?
The UK version stocked at Vape Wave holds 2ml of e-liquid, which meets TPD regulations for refillable tanks sold in the UK. International versions of this pod are sometimes listed with a larger 5.5ml capacity, but that figure does not apply to stock sold in the UK.
Does this pod come with a coil?
No, the coil is sold separately. You'll need a TPP series coil, such as the TPP DM1 or TPP DM2 mesh coil, to use with this pod.
Can I use PnP coils in this pod?
No. This pod is designed specifically for the TPP coil series. PnP coils use a different pod shape and are not interchangeable with TPP pods, even though some VOOPOO devices can switch between the two systems with an adaptor.
How do I fill the TPP Replacement Pod?
Remove the pod from the device, unscrew the base, and fill through the bottom opening past the silicone stopper. Reseal the base fully before reattaching the pod to avoid leaks.
Why is my new pod leaking?
Leaking is usually caused by an incorrectly sealed base, an overfilled tank, or a coil that isn't seated properly. Double-check the base is screwed on tightly and that e-liquid hasn't been filled above the maximum fill line.
How often should I replace the pod itself, not just the coil?
Most vapers replace the pod every one to three months, or sooner if it cracks, discolours, or the magnetic seal becomes loose. The coil inside typically needs replacing more often, roughly every one to two weeks.
Can I use nicotine salt e-liquid in this pod?
Yes, the pod itself is compatible with both freebase and nicotine salt e-liquids. The coil resistance you choose will affect which type suits your vaping style best, with higher-resistance coils generally better suited to nic salts.
What's the difference between this pod and the TPP-X pod?
The original TPP pod uses a bottom-fill design with a silicone stopper, while the newer TPP-X pod uses a top or side-fill locking mechanism and a larger internal design. Both use the same TPP coil range, but they are not physically interchangeable pod shells.
Is this pod compatible with the DRAG X Pro?
Yes, the DRAG X Pro uses the same TPP coil system, so this pod fits and functions on that device as well as the original DRAG X Plus.
Why does my flavour taste weaker even with a new pod?
If flavour is weak despite a new pod, the coil is the most likely cause. Coils lose performance with regular use even if the pod itself is undamaged, so pairing a new pod with a fresh coil usually resolves this.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
