VooPoo Vinci E Replacement Pod Cartridges
The VooPoo Vinci E Replacement Pod is the official refill cartridge for the VooPoo Vinci E80, Vinci E120, and Argus E40 pod vape kits. Each pod arrives with a built-in PnP X coil, a double-sealed body to stop leaks, and a side-fill port that takes seconds to top up. Once the flavour on your current pod starts to fade or the coil burns out, this is the pod that gets your device running like new again, without buying a whole new kit. Available at Vape Wave.
Design
The Vinci E pod uses a double-sealed internal structure, which is VooPoo's way of keeping e-liquid locked away from the airflow channel until you actually take a puff. This is the main reason these pods run drier in a pocket or bag than older, single-seal Vinci pods. The side-fill plug sits flush against the pod body, so refilling does not mean prising the whole unit apart or risking a spill down the side of your device.
Pod System
Every pod holds 2ml of e-liquid, in line with UK TPD regulations for refillable pod tanks. Filling is done from the side: lift the silicone bung, tip your e-liquid in along the glass wall to avoid air bubbles, then push the bung back down until it seats fully. Leave a filled pod to rest for around five minutes before vaping so the cotton wick can fully saturate.
Coil Technology
The integrated coil uses VooPoo's PnP X platform with a gold-quality cotton mesh build. Mesh coils heat a wider surface of e-liquid than traditional round-wire coils, which is why flavour tends to come through more clearly and vapour production feels denser for the same wattage. Because the coil is sealed inside the pod, there is no separate coil-swap process; when the pod is finished, the whole unit is replaced.
Nicotine Strength
This is an empty replacement pod, so there is no nicotine strength built in you choose the e-liquid. The 0.3 ohm option is built for lower-nicotine, higher-VG shortfills, while the 0.6 ohm and 0.8 ohm options are suited to nic salts up to 20mg, which is the maximum legal strength for e-liquids sold in the UK.
VooPoo Vinci E Replacement Pod Cartridges Performance
Resistance is what shapes the draw here. The 0.3 ohm pod fires at 18 to 20W and is built for a looser, airier RDTL pull, best paired with a 70% VG e-liquid to avoid flooding. The 0.6 ohm pod runs at 14 to 18W for a classic, tighter MTL draw. The 0.8 ohm pod also fires between 18 and 20W but delivers a warmer, denser vape, and both the 0.6 and 0.8 ohm builds pair best with 50% VG e-liquid. Across all three, the mesh coil keeps flavour consistent right up until the pod nears the end of its life.
Seamless Compatibility
The VooPoo Vinci E Pods work with the VooPoo Vinci E80, VooPoo argus E40, VooPoo argus E120 Pod Kits. The pods magnetically fit, creating a tight seal with no leakage or spillage, which is also commonly not found with cheaper vape cartridges.
Who It's For
This pod suits existing Vinci E80, Vinci E120 or Argus E40 owners who need a routine replacement, as well as anyone who has just picked up one of these kits and wants a spare pod ready to go. The range of resistances also makes it workable for vapers moving between a tighter MTL habit and a looser, more DTL-leaning style without switching devices.
What's Included
- 2 x VooPoo Vinci E Replacement Pods (built-in PnP X coil)
- Choice of 0.3Ω, 0.6Ω or 0.8Ω resistance at checkout
- Silicone side-fill bung fitted as standard
VooPoo Vinci E Replacement Pod Cartridges Specification
| Feature | Detail |
|---|---|
| Compatible devices | VooPoo Vinci E80, Vinci E120, Argus E40 |
| Pod capacity | 2ml (TPD compliant) |
| Coil type | Integrated PnP X gold mesh coil |
| Resistance options | 0.3Ω, 0.6Ω, 0.8Ω |
| Wattage range | 14–20W (varies by resistance) |
| Vaping style | MTL, RDTL, loose DTL |
| Fill method | Side-fill with silicone bung |
| Leak protection | Double-sealed pod structure |
| Pack size | 2 pods per pack |
| Recommended e-liquid VG | 70% VG (0.3Ω) / 50% VG (0.6Ω, 0.8Ω) |
Safety Information
This product is restricted to adults aged 18 and over, in line with UK vaping regulations. Store filled and unfilled pods away from children and pets. Do not fire a coil that has not been primed, as this can cause a harsh, burnt taste and permanent wick damage. If a pod develops a crack or the seal fails, stop using it and replace it rather than continuing to refill it.
Things To Consider Before Buying
Check which Vinci E model you own, since the E80, E120 and Argus E40 all share this pod but other Vinci variants such as the Vinci Q or original Vinci do not. Think about whether you prefer a tighter MTL draw or a looser RDTL pull, as this decides which resistance to pick. Also check what VG ratio your usual e-liquid is, since pairing the wrong VG with the wrong resistance is the most common cause of flooding or dry hits.
Maintenance Tips
Prime every new pod before first use by adding a couple of drops of e-liquid directly onto the visible mesh through the airflow slot, then wait five minutes before vaping. Wipe the pod's contact pins with a dry cloth if you notice inconsistent firing. Avoid leaving a pod completely empty for long periods once it has been filled, as this dries the wick out and shortens coil life.
Storage Tips
Store spare pods upright, in a cool spot away from direct sunlight and away from radiators or car dashboards, since heat can affect the silicone seals over time. Keep unopened packs in their original packaging until needed, and once a pod is filled, try to use it within a few weeks for the best flavour.
Returns and Refunds Policy
Unopened, unused Vinci E Replacement Pods can be returned in line with Vape Wave's Return & Refund Policy. As with most e-liquid contact items, opened or used pods may not be eligible for return for hygiene reasons, so check the full policy before purchase if you are unsure which resistance to order.
Conclusion
The VooPoo Vinci E Replacement Pod is a straightforward way to keep an E80, E120 or Argus E40 running without replacing the whole device. The double-sealed build cuts down on leaks, the PnP X mesh coil keeps flavour steady, and having three resistance options means the same pod line covers both a tight MTL habit and a looser, more direct draw. For anyone already invested in the Vinci E ecosystem, it is the natural pod to keep in stock.
Related Products
- VOOPOO VMATE V2 Replacement Pods
- Voopoo Argus Pod Cartridge 0.4 Ohm 2ml
- Voopoo Argus Replacement Pods Cartridge
- VooPoo Argus Empty Replacement Pods
- Voopoo Argus Multi-Ohm Pods Cartridges
Frequently Asked Questions
What devices is the VooPoo Vinci E Replacement Pod compatible with?
This pod is built specifically for the VooPoo Vinci E80, Vinci E120, and Argus E40 pod kits. It is not compatible with the original Vinci, Vinci Q, Vinci X, or Vinci II, which use different pod shapes and coil connections, so it is worth checking your exact model before ordering.
How many puffs does a VooPoo Vinci E pod last?
VooPoo has not published an official puff count for this pod, as lifespan varies with wattage, e-liquid thickness and how often you vape. Most users get several refills, roughly five to ten, from a single pod before flavour noticeably drops and it is time to swap in a new one.
What is the difference between the 0.3, 0.6 and 0.8 ohm Vinci E pods?
The 0.3 ohm pod fires hotter, at 18 to 20W, for a looser RDTL draw and works best with 70% VG e-liquid. The 0.6 ohm pod runs cooler at 14 to 18W for a tighter, classic MTL pull. The 0.8 ohm pod also sits at 18 to 20W but gives a warmer, denser vape, and both the 0.6 and 0.8 ohm versions suit 50% VG e-liquid better than high-VG blends.
How do I refill the VooPoo Vinci E pod?
Lift the silicone bung on the side of the pod, tip e-liquid in slowly along the inner wall to avoid trapping air bubbles, then push the bung firmly back into place. Leave the filled pod to sit for around five minutes before vaping so the coil's wick can fully soak through.
What nicotine strength e-liquid should I use?
Since this is an empty pod, you choose the strength. Nic salts up to the UK legal limit of 20mg work well with the 0.6 and 0.8 ohm coils, while lower-strength, higher-VG shortfills suit the 0.3 ohm option better given its higher wattage and airier draw.
Can I use the Vinci E pod for direct-to-lung vaping?
It can handle a looser, restricted DTL style, particularly on the 0.3 ohm coil, but it is not built for the same open-airflow, sub-ohm DTL vaping you would get from a dedicated tank. Think of it as MTL through to a light, restricted DTL rather than full cloud-chasing.
How often should I replace my Vinci E pod?
Replace the pod once flavour tastes muted or burnt even after a fresh refill, or once you notice reduced vapour despite the pod being full. Heavy daily users typically get through a pod every one to two weeks, while lighter users can stretch that further.
Why is my Vinci E pod leaking?
Leaking is usually down to the silicone bung not being pushed fully home after refilling, overfilling past the fill line, or a cracked seal on an older pod. Check the bung is properly seated first, and if leaking continues from a pod that has been in use for a while, it is likely time to replace it.
Why does my Vinci E pod taste burnt?
A burnt taste almost always means the coil fired before it was fully primed, or the pod has run dry. Always add a few drops of e-liquid to the mesh before first use and avoid firing the device on a pod that is close to empty.
Are VooPoo Vinci E pods compatible with the Argus E40?
Yes, the Argus E40 shares the same PnP X pod format as the Vinci E80 and E120, so this replacement pod fits all three devices without any modification.
Do I need to prime a new coil before using it?
Yes. Add two or three drops of e-liquid directly onto the exposed mesh through the airflow slot, fill the pod as normal, then wait roughly five minutes before your first puff. Skipping this step is the leading cause of a harsh, burnt first hit on any mesh coil.
Can I use freebase e-liquid, or only nic salts?
Both work. Freebase e-liquid tends to suit the 0.3 ohm coil at higher wattage, while nic salts are generally better matched to the 0.6 and 0.8 ohm options, since salts are formulated to feel smoother at lower power.
Returns Policy
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
Shipping
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
- Choosing a selection results in a full page refresh.
