




Couldn't load pickup availability
The VooPoo PnP VM Replacement Coils are the official replacement heads for VooPoo's PnP (Plug 'n' Play) atomiser platform, sold in a five-pack across the VM1, VM3, VM4, VM5, and VM6 resistances. Each coil uses VooPoo's mesh heating technology to keep flavour consistent and vapour production smooth, whether you vape mouth-to-lung or prefer a more open, direct-lung draw. If your VooPoo Vinci or Drag device is starting to taste burnt, muted, or gurgly, a fresh PnP coil is usually the fix, and this pack covers nearly every wattage and airflow style VooPoo's ecosystem supports. Browse the full Coils & Pods collection for more replacement options across other brands. Shop now at Vape Wave.

| Coil | Resistance | Recommended Wattage | Vaping Style | Coil Type |
|---|---|---|---|---|
| PnP-VM1 | 0.3Ω | 32–40W | RDL / DTL | Mesh |
| PnP-VM3 | 0.45Ω | 25–35W | RDL | Mesh |
| PnP-VM4 | 0.6Ω | 20–28W | MTL / RDL | Mesh |
| PnP-VM5 | 0.2Ω | 40–60W | DTL | Mesh |
| PnP-VM6 | 0.15Ω | 60–80W | DTL | Mesh |
Compatible devices: VooPoo Vinci, Vinci X, Vinci R, Vinci 2, Vinci SE, Vinci Royal Edition, Drag X, Drag S, Navi, and other PnP pod tank-based kits.




VooPoo built the PnP range around consistency and compatibility. Each coil drops into place without threading or twisting, so swapping resistances takes seconds, not minutes. Organic cotton wicking is used throughout to reduce dry hits, and the mesh coil design heats e-liquid evenly across a wider surface area than a traditional round wire coil, giving denser vapour and a fuller flavour profile at every resistance in the VM range.
The PnP coil head uses a slot-and-click mechanism: line up the connector pins, press the coil into the pod base, and it locks into place. There's no coil screw to strip and no O-ring to misalign, which makes this one of the more beginner-friendly coil systems on the market. The coils themselves are built with a stainless steel housing and a wide juice-flow slot to keep the wicking ports saturated during heavier use.
All five variants (VM1, VM3, VM4, VM5, VM6) use VooPoo's mesh coil construction rather than round wire. Mesh heats faster and more evenly, which typically means better flavour reproduction and less risk of hotspots that cause burnt hits. The resistance you choose determines the vaping style: lower ohms (VM5, VM6) suit higher-wattage, airier direct-lung vaping, while higher ohms (VM3, VM4) sit closer to a restricted or mouth-to-lung draw. This spread is what makes the pack useful for switching between styles on the same device.
Reviewers and everyday users consistently point to the PnP VM series as one of VooPoo's stronger coil families for flavour clarity. VM4 tends to be the pick for vapers who want a warmer, MTL-leaning draw with nic salts, while VM5 and VM6 are favoured by direct-lung vapers chasing bigger clouds and cooler airflow. Coil lifespan varies with usage but most users report solid performance for one to two weeks of regular vaping before flavour starts to fade.
This pack suits existing VooPoo Vinci, Drag, or Navi owners who need replacement coils, as well as vapers who want to experiment across resistances to find their ideal wattage and draw style. It's equally useful for someone switching from MTL to DTL vaping on the same device without buying a new kit. If you're shopping for the full device rather than a replacement part, take a look at the VOOPOO Vinci Pod Kit or the Vinci SE Pod Kit instead.
Always prime a new coil before use by adding a few drops of e-liquid directly onto the exposed cotton and letting it sit for five to ten minutes before vaping. Firing a dry coil can burn the wick instantly and ruin the flavour permanently. Store coils away from children and pets, and stop using any coil that shows signs of damage, corrosion, or a persistent burnt taste after priming. This product is for use by adults aged 18 and over.
Check your device's compatible wattage range against the coil resistance before adding to cart. Running a VM6 (60–80W) on a device capped at 40W will underperform, and pushing a VM4 (20–28W) coil too far past its wattage can cause burnt hits. If you're unsure which resistance suits your vaping style, our VooPoo collection lists compatible devices alongside each kit.
Prime every coil before first use and give it a few gentle puffs without firing fully to help the cotton settle. Wipe any excess e-liquid from the coil's base and pins with a clean, dry cloth if you notice leaking. Avoid chain vaping in the first few uses, as this doesn't give the wick enough time to re-saturate and can lead to a burnt taste developing early.
Keep unused coils in their sealed packaging, in a cool, dry place away from direct sunlight. Once a coil pack is opened, store spare coils upright to prevent any residual e-liquid pooling on the mesh. Avoid leaving coils in a hot car or humid bathroom, as temperature swings can affect the cotton and metal housing over time.
Unopened, sealed coil packs can be returned in line with our Return & Refund Policy. For hygiene reasons, opened coil packaging may not be eligible for return, so please check compatibility carefully before use.
The VooPoo PnP VM Replacement Coils give Vinci and Drag owners a genuine, five-resistance lineup to keep their device running at its best, whether that's a tight MTL pull or a fuller DTL cloud. Pick the resistance that matches your wattage and juice, prime it properly, and you'll get consistent flavour without needing a whole new kit.
The VM1 sits at 0.3Ω and runs best between 32 and 40W, giving a slightly more open, restricted direct-lung draw. The VM3 is 0.45Ω and runs cooler, between 25 and 35W, producing a tighter, more restricted pull that suits vapers who prefer a warmer, denser flavour hit at lower power.
Most vapers get roughly one to two weeks of consistent use from a single coil, though this depends on how often you vape, the VG content of your e-liquid, and the wattage you run it at. A drop in flavour or a slightly burnt taste is usually the clearest sign it's time to swap.
Yes, the PnP VM series is compatible with the Vinci 2 as well as the original Vinci, Vinci X, Vinci R, and Vinci SE, since they all share VooPoo's PnP pod tank system.
The VM4 (0.6Ω) is generally considered the closest to a true MTL experience within the VM range, offering a tighter draw suited to nic salts and 50/50 e-liquids at lower wattage.
Common signs include a burnt or muted taste, reduced vapour production, gurgling sounds, or visible leaking around the coil base. If priming and cleaning don't resolve the issue, it's time for a replacement.
VM5 and VM6 are built for higher-wattage, direct-lung vaping and perform best with high-VG shortfills rather than nic salts, which are typically better suited to lower-wattage MTL coils like the VM3 or VM4.
Remove the old coil from the pod base by pulling it straight out, then align the pins on the new coil with the connector slots and press firmly until it clicks into place. No screwing or tools are required.
Yes, the Drag X and Drag S both use VooPoo's PnP pod system, so the VM coil range is fully compatible with these devices alongside the Vinci and Navi ranges.
Higher-wattage coils like the VM1, VM5, and VM6 pair best with 70/30 VG e-liquid or shortfills, while lower-wattage coils such as the VM3 and VM4 work well with 50/50 blends or nic salts.
This almost always points to insufficient priming. Add e-liquid directly to the cotton before your first vape and let it sit for several minutes so the wick is fully saturated before firing the device.
Each pack contains five coils, allowing you to stock up on a single resistance or, depending on the variant listed, mix resistances to suit different vaping styles.
Yes, all VooPoo products stocked at Vape Wave, including this PnP VM coil range, are sourced as genuine, authentic stock, with fast UK delivery.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Thanks for subscribing!
This email has been registered!
