




Couldn't load pickup availability
The Vaporesso Xros Nano Pod Vape Kit is a compact, refillable pod system built for vapers who want dependable mouth-to-lung performance in a device small enough to disappear into a pocket. Powered by Vaporesso's Axon chipset and a 1000mAh battery, it delivers the same flavour consistency found in Vaporesso's larger mods, just scaled down. This is a pod kit, not a prefilled pod, so it is refilled with your own choice of e-liquid rather than arriving pre-loaded.

The Xros Nano keeps Vaporesso's signature ergonomic curve but shrinks it down into one of the smallest kits in the Xros line-up. The zinc alloy body sits comfortably in the hand and slips easily into a coat pocket or handbag. A discreet LED battery indicator sits on the base, while the magnetic pod connection keeps the unit slim without sacrificing a secure fit.
A 1000mAh battery sits at the heart of this kit, charged through a USB-C port for quicker top-ups than older micro-USB devices. Vaporesso's power management protects both battery and pod, so output stays consistent from a full charge down to empty rather than tailing off unpredictably. Most moderate users get through a full day between charges.
The Xros Nano uses Vaporesso's proven Xros pod range, each holding 2ml of e-liquid and filled from the top for a mess free refill. Pods connect magnetically, so swapping between resistances takes seconds. Because the kit is compatible with the wider Xros family, existing Xros users can reuse pods they already own.
Two coil options are included: a 0.8ohm mesh pod for smoother, flavour-focused mouth-to-lung draws, and a 1.2ohm pod tuned for stronger nicotine delivery on tighter draws. Mesh coil construction heats more evenly than traditional coil wire, which reduces dry hits and extends the working life of each pod.
As a refillable device, the Xros Nano works with whichever nicotine strength you fill it with, from 0mg shortfill juice up to 20mg nicotine salts. The 1.2ohm pod is best suited to higher strength nic salts for a tighter, throat-hit-focused draw, while the 0.8ohm mesh pod suits lower strengths and a smoother, flavoflavour-ledur led vape. Always check current UK regulations on maximum nicotine strength before purchasing e-liquid.
Pulse Mode, powered by the Axon chip, monitors coil performance in real time and adjusts power delivery to keep flavour consistent from the first puff of a fresh pod to the last. Output sits at up to 16 watts, enough for satisfying mouth to lung vaping without the harsh hit some higher wattage devices produce.
The Vaporesso Xros Nano suits smokers transitioning to vaping who want a straightforward, button free device, as well as existing vapers looking for a smaller, more discreet backup kit. Its size and simplicity also make it a practical option for anyone wanting a low fuss device to carry day to day.
| Feature | Detail |
|---|---|
| Battery Capacity | 1000mAh |
| Charging | USB-C, fast charge |
| Max Output | 16W |
| Pod Capacity | 2ml |
| Coil Options | 0.8ohm mesh, 1.2ohm |
| Firing Mechanism | Draw activated |
| Chipset | Axon chip with Pulse Mode |
| Dimensions | 63.1mm x 48.8mm x 14.9mm |
| Fill Method | Top fill |
| Airflow | Adjustable slider |
This product contains a lithium-ion battery and should only be charged using the supplied USB-C cable or a compatible charger. Do not leave charging unattended for long periods and avoid exposing the device to extreme heat or moisture. This product is intended for adults aged 18 and over. Keep e-liquids and pods out of reach of children and pets.
Check that you are choosing a nicotine strength and coil resistance that matches your current vaping habits, as the 0.8ohm and 1.2ohm pods suit different draw styles. If you already own Xros series pods from a previous device, confirm compatibility before buying spares, since not all pod generations are interchangeable. Consider battery life against your daily usage if you are frequently away from a charging point.
Prime a new pod by letting it sit filled with e-liquid for a few minutes before first use, which helps prevent early dry hits. Wipe the magnetic contacts periodically with a dry cloth to maintain a clean connection between pod and battery. Replace pods once flavour noticeably fades rather than waiting for a burnt taste to appear.
Store the kit upright where possible to reduce the risk of e-liquid leaking into the airflow channel. Keep it away from direct sunlight and radiators, as heat can affect both battery performance and e-liquid consistency. If not in use for an extended period, remove the pod and store it separately to preserve coil life.
Full details of eligibility, timeframes and the return process are available on our Returns and Refunds Policy page.
The Vaporesso Xros Nano Pod Vape Kit brings together a genuinely pocketable design, a dependable Axon chipset, and Vaporesso's well-proven Xros pod ecosystem. Whether you are switching from smoking or looking for a compact companion device, it offers a straightforward, low-maintenance mouth-to-lung vaping experience backed by a battery that comfortably lasts a full day for most users.
Yes. It uses a simple draw-activated firing system with no buttons or settings to configure, which makes it straightforward for anyone new to vaping. The included 0.8ohm and 1.2ohm pods also cover a range of nicotine strengths, so new users can find a comfortable starting point.
With its 1000mAh battery, most moderate users get through a full day of typical use before needing to recharge. Heavier use or higher wattage settings will reduce this, and USB-C fast charging means downtime between charges is minimal.
The Xros Nano is compatible with the wider Vaporesso Xros pod range, including the 0.8ohm mesh and 1.2ohm pods supplied with the kit. This makes it a convenient option for existing Xros users who already have spare pods.
Yes. The 1.2ohm pod is particularly well suited to nicotine salt e-liquids, delivering a tighter draw and stronger throat hit, while the 0.8ohm mesh pod works well with lower strength salts or standard e-liquids.
The pod uses a top-fill system, so the fill port is accessed by removing the pod from the device and opening the silicone plug at the top. This keeps refills quick and reduces the chance of spills compared with side-fill designs.
The device does not offer manual wattage adjustment in the traditional sense, but its Axon chip and Pulse Mode automatically regulate power delivery based on coil resistance, keeping output consistent without needing manual input.
Pulse Mode is a feature of Vaporesso's Axon chipset that continuously monitors coil performance and adjusts power delivery in real time. This helps maintain steady flavour and vapour production throughout the life of a pod rather than tapering off as the coil wears.
The device has an LED battery indicator near the base that shows charge status. When the light signals low battery, connect the supplied USB-C cable to begin fast charging.
The kit is primarily designed for mouth to lung vaping rather than direct lung use. The adjustable airflow slider allows some fine tuning of draw resistance, but it is not intended for high vapour, direct lung setups.
Most users find pods last between one and two weeks with regular use, though this varies depending on e-liquid type and usage frequency. A noticeable drop in flavour or a burnt taste is the clearest sign a pod needs replacing.
Its compact size makes it a practical travel device, though as with any vape kit, it is worth checking destination specific regulations on carrying vapes and e-liquids before flying, and always pack batteries in hand luggage rather than hold luggage.
Availability varies by batch, so please check the live product listing on Vape Wave for current colour options in stock.
You may return most new, unopened items within 30 days of delivery for a full refund. We'll also pay the return shipping costs if the return is a result of our error (you received an incorrect or defective item, etc.).
You should expect to receive your refund within four weeks of giving your package to the return shipper, however, in many cases you will receive a refund more quickly. This time period includes the transit time for us to receive your return from the shipper (5 to 10 business days), the time it takes us to process your return once we receive it (3 to 5 business days), and the time it takes your bank to process our refund request (5 to 10 business days).
If you need to return an item, simply login to your account, view the order using the "Complete Orders" link under the My Account menu and click the Return Item(s) button. We'll notify you via e-mail of your refund once we've received and processed the returned item.
We can ship to virtually any address in the world. Note that there are restrictions on some products, and some products cannot be shipped to international destinations.
When you place an order, we will estimate shipping and delivery dates for you based on the availability of your items and the shipping options you choose. Depending on the shipping provider you choose, shipping date estimates may appear on the shipping quotes page.
Please also note that the shipping rates for many items we sell are weight-based. The weight of any such item can be found on its detail page. To reflect the policies of the shipping companies we use, all weights will be rounded up to the next full pound.
Thanks for subscribing!
This email has been registered!
